Sonihull – Set to transform offshore energy sector

The world’s leading ultrasonic bio-fouling specialist is helping offshore windfarm engineers to reduce manufacturing costs, cut cleaning requirements and improve landing-stage safety.

NRG Marine, the UK-based manufacturer of Sonihull ultrasonic antifouling systems, in association with OES Group, has revealed a bold new future for manufacturers and operators of offshore wind turbines.

Sonihull ultrasonic antifouling systems are changing the way these offshore monoliths are being built and operated, providing substantial Capex and lifetime MRO savings.

“First, we have the design requirements for the foundations,” explained Dominic Findlow, Technical Director of NRG Marine, talking at WindEnergy expo in Hamburg. “In many cases, structural steel thickness has to be increased by 10% to account for the additional hydrodynamic loadings resulting from the attachment of marine growth. With an integrated Sonihull8 ultrasonic antifouling system we can control marine bio-fouling which will lower the capex for projects by reducing the structural steel requirements.”

“This weight-saving also reduces the initial installation costs. The absence of a thick carpet of marine growth will also save about 50 tonnes of added weight over the lifetime of an installation, which will reduce lifting costs again during decommissioning. Corrosion is also a key concern for these structures, marine fouling accounts for about 30% of lifecycle corrosion. So, keeping the fouling in check will allow operators to reduce the design burden here too.”

As with any marine-based structure, weeds and other bio-fouling will increase the hydrodynamic drag of an installation. To ensure that structural integrity is maintained even during very rough sea conditions, the weeds and fouling usually have to be maintained and regularly cut off by specialist offshore cleaning crews and divers.

“By integrating Sonihull8 systems into the underwater structures the build-up of weeds and other biofouling is reduced and this significant maintenance cost can be cut,” added Findlow. Another area that can cause serious problems is the landing-stage and ladder. Hard fouling will establish on the ladder areas which can be a safety hazard to service personally.

Softer growth will result in slipper ladder rungs which could also cause an injury during access and egress to the turbine. A Sonihull system fitted to the outer rungs and to the boat landing structure will prevent marine growth in this tidal area. The tranducers benefit from an IP68 rating which also allows to be installed submerged if necessary.

Related Case Studies

Protect your vessel

Sonihull’s mission is to deliver environmentally safe, cost effective antifouling wherever unwanted bio-fouling persists. Our vision is:

To make dosing the oceans with poisonous biocides and microplastics a thing of the past
To deliver effective antifouling systems using the power of ultrasound
To save the oceans, one ship at a time